Request

Prototype injection moulding inserts, repeat orders, collect holders

Do you have a concrete project and would like a quotation, to re-order parts from an existing tool or to request a Collet holder? We have compiled all the information that will help you and us to prepare a meaningful offer for your project or repeat order that is tailored to your needs.

As a rule, we process inquiries within 24 hours. In particularly urgent cases, please note this in your inquiry and call again if necessary. All inquiries will of course be treated confidentially. Information on confidentiality and data security can be found here.


Contact for prototype injection moulding inserts

Markus LangerEmployee order processing

Phone: +49 6071 9229-31
Fax: +49 6071 9229-11
E-Mail: info@solidtec.de

Patrick StändnerEmployees Order processing

Phone: +49 6071 9229-42
Fax: +49 6071 9229-11
E-Mail: info@solidtec.de

Portrait of the employee order processing Sebastian Gölz

Sebastian GölzEmployee order processing

Tel: +49 6071 9229-23
Fax: +49 6071 9229-11
E-Mail: info@solidtec.de


Contact person for reordering parts from tools

Marvin KleinEmployee order processing

Phone: +49 6071 9229-221
Fax: +49 6071 9229-11
E-Mail: info@solidtec.de

Christian GlaserEmployee order processing

Tel: +49 6071 9229-22
Fax: +49 6071 9229-11
E-Mail: info@solidtec.de

Patrick PritschQuality Management Representative

Phone: +49 6071 9229-49
Fax: +49 6071 9229-11
E-Mail: info@solidtec.de


Required information

Contact person, complete address, telephone no. and e-mail address, if necessary different delivery address.

In order to be able to realise a fast and precise tool calculation, we absolutely need a 3D data set* of the desired component. Furthermore, a drawing or the exact description of the part function is necessary for the tolerances. At the latest when an order is placed, we require exact details and, if possible, connecting parts for functional testing.

If only drawings or sketches are available, we usually provide a guide price offer. In special cases we can also prepare quotations based on existing sample parts. It is also possible to generate 3D data according to drawings. Please contact us for more information.

* 3D data of the component should be provided in one of the following formats: stp, stl, VDA, IGS, other formats on request

We can manufacture parts from all thermoplastics.

If you have not yet decided on an exact material, we will be happy to help you with the selection.

If the plastic to be used for your project has already been determined, we need the following information:

  • Plastic type: e.g. PA6.6, POM, ABS, etc.
  • Material additives: e.g. 30% glass fibre content, 15% glass beads, talcum-reinforced, PTFE, etc.
  • Colour: e.g. RAL shades, masterbatch no.

If you require a very specific material, please state the exact trade name, e.g. Ultramid A3WG6, Hostacom, Bayblend T45, etc.

Due to the strong fluctuations in material prices, we usually quote the cost of parts excluding material. In case of an order you can provide it, or we can take care of the procurement of the material and charge you our cost price plus a small administration fee.

What quantities do you need? If only a few parts are required as prototypes or if a series start-up or a small series is to be covered.
The more detailed your information is at this point, the more precisely we can adapt the offer to your needs. For example, low-cost tools with manual inserts are useful for small quantities, while for larger quantities it is worth automating or multiple tool design to achieve lower part prices.

Depending on the material used, we guarantee quantities of 1,000 - 50,000 parts. However, we are also able to produce significantly larger quantities. However, this should already be known at the start of the project so that the tool can be designed for these quantities.

One of the most important information for your offer: How many parts do you need at what time? As a rule, we need 1 - 4 weeks for simple tools, for complex assemblies correspondingly longer.

In emergencies, however, we are able to meet almost any deadline. Please state your ultimate delivery date, if this has already been determined, as additional costs may arise in the case of very short delivery dates. Should additional costs arise, we will of course show these separately in the offer.

For the correct allocation of our shipping documents / invoice in your company, we ask you to indicate an order number.

For quick processing of your enquiry/order, please quote our tool number. You will find these on our shipping documents and invoices. For safety reasons, please always include your part designation or article number.


Request form

The fields marked with * are mandatory fields.


Prototype injection moulding inserts / re-order

Collet holder

Personal data

Arrange an appointment for
a consultation at the trade fair