Injection moulding productsExamples of our products

Examples of our work with details of material, dimensions, weight and injection moulding process can be found in this overview.

Click on the respective injection moulding product to learn more.


Picture of an overmoulded, assembled coil former made of PC

Coilformers made of PC

Coilformers made of PC

Picture of an overmoulded, assembled coil former made of PC

Overmoulding of assembled coilformers made of PC

Preform for coil overmoulding

Material
PC

Dimensions
30 mm diameter

Weight
10 g

Injection moulding process
Fully automatic
 

Picture of overmoulded metal insert bushes

Metal insert bushes

Metal insert bushes

Picture of overmoulded metal insert bushes

Overmoulding of metal insert bushes

Overmoulding of inserts with high temperature plastic

Material
PPS GF40

Dimensions
55 x 30 x 20mm

Weight
25 g

Injection moulding process
semi-automatic

Picture of a clip with film hinge, optimized for snap function (PA6)

Clip with film hinge

Clip with film hinge

Picture of a clip with film hinge, optimized for snap function (PA6)

Clip with film hinge, optimized for snap function (PA6)

Holder with film hinge

Material
PA6

Dimensions
60 x 35 x 20mm

Weight
20 g

injection moulding process
Fully automatic

Picture of a coil former with winding coils made of PPS GF40

Coilformers

Coilformers

Picture of a coil former with winding coils made of PPS GF40

Coilformers with winding coils made of PPS GF40

Coilformers with very small winding grooves

Material
PPS GF40

Dimensions
25 mm diameter

Weight
7 g

injection moulding process
Fully automatic

Picture of a multiple overmoulding of punched grids made of PA6 GF25

Punching grid

Punching grid

Picture of a multiple overmoulding of punched grids made of PA6 GF25

Multiple overmoulding of punched grids made of PA6 GF25

Punched grid set in preform and subsequently overmoulded including insert.

Material
PA6 GF25

Dimensions
30 mm diameter

Weight
85 g

Injection moulding process
Folding process

Picture of a 2-component injection-moulded part produced by the tandem injection moulding process

2-component component

2-component component

Picture of a 2-component injection-moulded part produced by the tandem injection moulding process

2-component injection-moulded part (hard-soft), manufactured in tandem injection moulding from ABS-TPE

Hard-soft components Component

Material
ABS-TPE

Dimensions
30 mm diameter

Weight
15 g

Injection moulding process
Tandem injection moulding

Picture of a Colletholder made of POM

Collet holder made of POM

Collet holder made of POM

Picture of a Colletholder made of POM

Collet holder made of POM

Own development

Material
POM

Dimensions
30 - 110 mm

Weight
10 - 130 g

Injection moulding process
Fully automatic

Picture of a Colletholder made of POM

Collet holder made of POM

Collet holder made of POM

Picture of a Colletholder made of POM

Collet holder made of POM

Own development

Material
POM

Dimensions
30 - 110 mm

Weight
10 - 130 g

Injection moulding process
Fully automatic

Picture of a 2-component injection moulded part produced by the lay-over method

2-component component

2-component component

Picture of a 2-component injection moulded part produced by the lay-over method

2-component injection-moulded part made of PA and TPE (hard-soft), manufactured using the lay-over method

Surfboard fin with soft edge protection

Material
PA, TPE

Dimensions
60 x 90 x 5mm

Weight
90 g

Injection moulding process
Folding process

Picture of a ventilation flap made of 2

Ventilation flap

Ventilation flap

Picture of a ventilation flap made of 2

Ventilation flap made of PA66-TPE, 2-component injection moulding, manufactured using the turn down method

Hard-soft components Component

Material
PA66-TPE

Dimensions
125 x 60 x 10mm

Weight
95 g

Injection moulding process
Folding process

Picture of grip shells with structured surface made of translucent PC

Grip plates

Grip plates

Picture of grip shells with structured surface made of translucent PC

Handle shells with structured surface of translucent PC

Surface graining applied in the mould

Material
PC

Dimensions
100 x 55 x 25mm

Weight
40 g

Injection moulding process
Fully automatic

Image of a holder for MRT heads from PC

Holder for MRT heads

Holder for MRT heads

Image of a holder for MRT heads from PC

Holder for MRI heads from PC

high-precision component

Material
PC

Dimensions
80 x 160 x 20mm

Weight
100 g

Injection moulding process
Fully automatic

Picture of a housing assembly made of ABS and TPE

Housing assembly

Housing assembly

Picture of a housing assembly made of ABS and TPE

Housing assembly of ABS and TPE

Upper and lower housing part with all-round seal

Material
ABS, TPE

Dimensions
280 x 95 x 50mm

Weight
220 g

Injection moulding process
Fully automatic

Wir können liefern: Formen wie Teile.
Liebe Kunden, Partner und Interessenten,

Liebe Kunden, Partner und Interessenten, dank umfangreicher Vorsorge-Maßnahmen laufen Konstruktion und Produktion bei uns trotz Corona nahezu unverändert weiter. Nutzen Sie dies und halten Sie Ihre Produktion mit uns aufrecht!

Wir können Bestands- wie Neukunden gewohnt prompt und zuverlässig bedienen. Sie benötigen schnell Hilfe, da Ihre Produktions- und Lieferketten unterbrochen sind? Wir stehen Ihnen konstruktiv wie produktiv zur Seite. Wir helfen Ihnen aus und weiter, denn solidtec steht für Konstruktion, Formenbau und Produktion aus einer Hand und unter einem Dach. Mitten in Deutschland.

Sie erreichen uns unter T 06071 9229-0 bzw. per Mail an info@solidtec.de